aluimina, ceramic lined steel pipe

aluimina, ceramic lined steel pipe發布自toppipe Internatinal Supply Co., Ltd.

出自: toppipe Internatinal Supply Co., Ltd.  2009/10/14
關鍵字 wear resistant, abrasive proofing, alumina lined,

 General description:SHS-self-propagating alumina composite steel pipe is the new generation of wearable and corrosion resistant engineering pipeline, belongs to national "863" Hi-tech plan products. This pipe is composed of corundum(alpha-Al2O3), transit layer and steel from inside to outside, having good all round properties of corrosion resistant, wear-resistant, high temperature resistant and high strength, high toughness, high mechanical impact proof and thermal impact proof while it still can be processed by machining,grounding and welding etc. Specifications: Tube diameters:  50 to 1020mm Elbow angle: 22.5, 45, 60, 90, 120, 135, 150 degrees, etc. Three way pipes: Y shaped, Y lateral and other special shapes. Four way pipes: straight cross, reducing cross. Ceramic lining thickness: 3 to 8mm (including transition layer). Ex-works length: less than or equal to 3m. Customized maximum length can be achieved by welding. We can also provide products of other customized sizes at your demand. Packing: Seaworthy wooden cases. Material property:The alumina layer is formed by molten alumina at a temperature above 2500 degree Celsius. The molten alumina produced from the reaction Fe2O3+2Al=2Fe+Al2O3 spreads on the inside wall of the steel pipe under the influence of a centrifugal force, then solidifies, so the alumina layer has high density and smooth surface and bonds to the steel pipe.1. Alumina layer containing AL2O3 over 90%, acid fashness 96-98%, same as that of high corundum ceramic;2. Ten times of anti-corrosion than that of stainless steel;3. Wear-resistance is equivalent to carboloy ,more than dozen times of steel;4. Can sustain long period operation under 900 degree Celsius. Features: High abrasion resistant: Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungste-cobalthard alloys, and the abrasion resistance is 20 times as carbon steel pipes. Its rigidity is the highest among all oxides.Corrosion resistant: Corundum is a neutral material, and is ac-proof and foulingfree.  Heat resistant: The pipe can work under circumstances of  -50 to 800 degrees Celsius. Convenient installation: It is much lighter than any other types of composite pipes, and can be welded or connected through flanges. Cost effective: Ceramic-lined composite steel pipe can take the place of expensive stainless steel, titanium, nickel, cast stone or alloy pipes. Extended service life can also reduce mainten nce cost.

關鍵字 abrasive proofing, alumina lined, anit-corrosion, ceramic lined, composite steel pie, wear resistant,

聯絡toppipe Internatinal Supply Co., Ltd.

電郵地址

列印頁面

分享