base transceiver station security alarm and GPS tracking system

出自: Guangzhou zhi cheng industry co.,ltd  2010/10/23
關鍵字 Security, GSM Alarm system, GPS tracker

Special for cell security in base transceiver station (BTS) or cell site, Using GPS tracking and SMS alter to connect with CMS 

 Our this system is the spcial monitor and tracking system for the station battery / cell in the  base transceiver station (BTS) or cell site. It have the function of the real time tracking in the center menagerment system (CMS) and SMS alert connect with the CMS ,without extra power supply , It can directly get the power form the inside battery .and it can be triggered by the move or vibration. 24hours montior.


 our "GPS tracking anti-theft device" will start,the GSM data , GPS coordinates and vibration detectors on the alarm information will send to the alarm processing center,and we can tracking it real time , And our "GPS tracking anti-theft device" without charge in the case of continuing to work up to one month's time, effectively to help staff and police officers on the cell tracking and detection.



Communication Technology stability

GSM is the most suitable platform for mobile data communications, the communications bandwidth, reliability, security, high;


advanced positioning technology

Location information using GPS technology, positioning accuracy, positioning speed of all excellence;


install hidden, easy to use

Installed in the battery body, direct access 2V battery powered, No external power supply;


variety of alarm mode

Battery vibration, GPS coordinates mobile, GSM exchange and the base station changes alarm code;


network alarm system

Alarm centers supporting real-time GPS map coordinates and walking route alarm;


 system is stable, reliable

Into the cellar in the garage or underground when the income is not GPS coordinates, and timely recorded and reported to the last GPS coordinates

User-friendly look. In the case of no external charging the host may continue for one month;

Technical parameters:

 initial system boot of time: less than 40 seconds

 Machine Power Parameters:

Working voltage range: 1.5V---- 3V

Machine standby current: 2V/50mA

Working Peak Current: 2V/110mA

Operating temperature range: -20 degrees ----+ 85 degrees

(Note: As power is the step-up use, and to consider the battery voltage is 1.5V, the system should be able to work, so current consumption is greater)

GPS part of the parameters:

Working voltage range: 3.2V---- 5V

Working Peak Current: less than 100 mA

Receiver sensitivity: greater than -160 dbm

Cold start time (outdoor): less than 35 seconds.

GPS positioning accuracy :5-20 meters

 GSM part of the parameters:

Working voltage range: 3.2V ---- 4.2V

Machine standby current: less than 6 mA

Working Peak Current: less than 260 mA

Receiver sensitivity: greater than -120 dbm

Response Data: Time 10 seconds

 TX emission output power: 1W

 Working frequency band (3 band):

EGSM: TX/890 - 915 MHZ, RX/925 - 960 MHZ

DCS: TX/1710-1785 MHZ, RX/1805-1880 MHZ

PCS: TX/1850-1910 MHZ, RX/1930-1990 MHZ


The details of our this products , please contact with us ,we are hope to make great business with you .

關鍵字 GPS tracker, gsm alarm, GSM Alarm system, GSM burglar alarm, Security,

聯絡Guangzhou zhi cheng industry co.,ltd