Traction belt

Traction belt發布自Huatao Wire Belt Factory

出自: Huatao Wire Belt Factory  2015/06/11
關鍵字 Traction belt

Flexible use,perfect performance. It is not only used in corrugated board production, applications in the chemical and foodstuffs industry and many other sectors are also possible. In the corrugated board industry the traction belt is used for corrgated board transport. Over the single facter, for onward transport on the bridge and to the board deposit in the stacker. The traction belt is so flexible that perfect running is achieved even on tight and narrrow runs and with small roll diameters on the idle and drive rolls.

關鍵字 Traction belt

聯絡Huatao Wire Belt Factory

網站 - 沒有提供




其他來自Huatao Wire Belt Factory的產品與服務資訊

double facer belt發布自Huatao Wire Belt Factory 縮略圖

double facer belt

Products Features: Straight cut edge Level surface, clean mark Fasteners Cliper Steel High Tensile strenght Heat resistance Good moisture absorption Excellent air pemeability stability dimension Suitable for linear speed 200-260m/min Low noise and high speed of operation Long life time


High speed corrugator Belt

Applt speed:260m/min. Thickness:(9±0.3)mm Wideth:(1200-2900)mm Tension:60Mpa Heat-resistance:under200℃,accept short time pressure under150℃,accept long time pressure Weight per unit:(7±0.3)kg/m2 Min. winding radius:R70mm Air-permeability:1.95M3/M2

High speed corrugator Belt with kevlar發布自Huatao Wire Belt Factory 縮略圖

High speed corrugator Belt with kevlar

High speed corrugator Belt with kevlar edge is a consistent development bason on the high speed corrugator belt. It is ideal for corrugating systems with high production speed, even load systems and frequently changing paperboard widths. The belt's edge reinforcement of kevlar fibers reduce wear substantially and ensure a mor e long life time.

Needle Corrugator Belt發布自Huatao Wire Belt Factory 縮略圖

Needle Corrugator Belt

Material: PET100% PET100% Applt speed: 100-300m/min. 100-300m/min. Thickness: 9.3mm 9.3mm Wideth: 1400 -2380 mm 1400 -2380 mm Tension: 63Mpa 63Mpa Heat-resistance: 200 ℃ 230℃ Weft: 0.8%/180℃

Airslide belt發布自Huatao Wire Belt Factory 縮略圖

Airslide belt

Specifications: Model:QDB-6 Material:PET100% Thickness:(6±0.3)mm Wideth:(200-3000)mm Tension:50Mpa Heat-resistance:under200℃,accept long time pressure Weight per unit:(4.2±0.2)kg/m2 Min. winding radius:R20mm Air-permeability:≥1.75M3/M2 Life:14000h